How do I use Impact packing boxer briefs?Updated 2 hours ago

Here's a step by step guide on how to use Impact with a packer:

1. Locate the separate security cord and the built-in loop at the center front of the briefs.Thread the security cord through the safety loop vertically.

2. Grip the top loop, bring it down towards the bottom loop, and pull through the bottom loop- pull taught

3. Bring the bottom of the cord up to the top of the loop, the knot from step #2 should appear in the center

4. Holding the sides of the cord down, lift the knot and pinch the sides of the loop together below the knot.

5. While still pinching the sides of the new loop together, thread the head and shaft of the packer through the loop created in step # - adjusting to bring the loop as close to the base of the packer as possible. This will help ensure a more natural looking fit during the adjustment process. 

6. Tighten the cord loop around the packer shaft for a secure fit- do not over tighten as this can damage your packer. 

7. Place the packer into the packer pocket

8. Put the briefs on and adjust the packer as needed for your comfort and desired final look. 

Check out Packing with Impact for tips and tricks on how to adjust and wear your packer with Impact packing boxer briefs. 

Still not sure about something? Feel free to reach out to our Customer Care team for additional advice and assistance at [email protected]